Welcome To The World Of Heating Technologies
STOKER 200 WOOD BURNING SPACE HEATER

STOKER 200 WOOD BURNING SPACE HEATER

BACK TO ALL HEATERS AND FIREPLACES

STOKER 200 WOOD BURNING SPACE HEATER   

     «Long-lasting comfort» - that’s how shortly this universal heating and continuous-burning furnace «Stoker» may be described. The ability to give the heat for a long time is included into the design and based on the gas generation process. High efficiency of the furnace for a long heating of the room up to 7000 ft³ is provided by gas generation principle built-in the design, high convective properties, the ability to use storage tank and heating of water.

        Design features:

  • Continuous burning mode (up to 6 hours), 12kW power.
  • High capacity fire-box, ensuring complete combustion of the fuel.
  • Directed convection system.
  • Vertical door with heat resistant glass SHOTT ROBAX ("clear glass" function).
  • Fine adjustment of the combustion process.
  • Large heat transfer area.
  • Cooking surface with hob.
  • Remote water heating function (heat exchanger - option).
  • Large ash-pan.

        Oven «Stoker» is used in residential and commercial premises, fueled by wood. Fast space heating is created by convection flows that are generated by effective directed convection system and optional ability to use water heating system (heat exchanger). The duration of furnace work is provided by the equipment in the continuous burning mode, where there is an additional post-combustion of flue gas and the use of the option of heat retaining (heat accumulator).

Description of design elements: 

  • Reliability, functionality and versatility are the main criteria on the basis of which this universal heating and cooking machine was created.
  • Combustion chamber consists of two chambers, combustion (firebox) and afterburner;
  • The firebox has an impressive size and gives the possibility to get a large amount of wood into it; this allows to increase the time of furnace work in a mode of continuous burning from one tab and ensure high temperature gain.
  • Afterburner chamber has injector tubes through which the heated air passes for complete combustion of the flue gases. Special arrangement creates a longer pathway of the flame in the mode of temperature gaining and food warming up.
  • Micro flue damper embedded in the furnace body is needed to supply air to the upper zone of the loading door and provides cleanness of the glass.
  • Ash-pan with micro flue damper allows you to remove the ashes missed through the grate gap and adjust the air supply to the combustion chamber. Micro flue damper built into it provides even finer adjustment of combustion control in the continuous burning mode.
  • Grate has ash protection function, creates high-temperature flame in ignition mode and provides uniform burning of firewood.
  • Flue damper allows to adjust the vacuum in combustion chamber of the furnace, and is placed in a removable pipe chimney dedicated for removal of flue gas.
  • Convective edges form a system of directed convection with increased heat transfer with rapid heating and protection from infrared radiation.
  • Cooking surface with hob allows to place the dishes for food heating and cooking.

Functional features and device operation.

        The furnace design provides heating and circulation of warm air by means of heat energy released by the combustion of fuel. Warm air temperature depends on the rate of fuel combustion - this process is controlled by the air supply into the furnace.

Regular adjustment is performed by pulling out (retracting) of the ash-scoop and adjustment of traction by chimney stack flue damper.

Fine adjustment of the air supply into the furnace is achieved by micro flue dampers, one of which is built into the top of the furnace body, and the second one - into the ash-scoop.


        To extend the functional range, the principle of «FT» (Free Transformation) is used in the construction that provides equipping of the base model with the options.

  • Heat accumulator (option) is hung on the side walls of the furnace, keeping the heat for a long time.
  • Heat exchanger (option) is integrated into the furnace, intended for heating of water and is set on place of the removable screen. The option allows to not only heat the room, but also provide the user with hot water.

        Materials used for the manufacture of continuous burning furnaces provide reliability, environmental friendliness and safety. Furnace design combines ergonomics and strict form of classical «Stoker» style. High glass of the door gives the device the characteristics of the fireplace, and the side edges possess not only functional load, but also form the modern look of the heater. Matte black color is formed with silicone protective paint coating and allows to fit in any interior of the room.


 

Description

Stoker

   100   

    150  

    200    

Maximum volume of heated premises, ft³

3500

5300

   7000

Nominal thermal power of the stove, kW:

6

9

    12

Efficiency output, %
not less than

75

75

    75

Furnace depth, inch

15

19

     23


Flue connection diameter, inch

    6

Weight, lb

97 

105

110

Cooking surface (hob)

Available

Fuel type

Firewood


What's in the box:

  • STOKER 200 (30''x16''x24''), 110lb;
  • Adapter for (6'' diameter) chimney pipes;
  • Manual.

$790.00

Reviews

Stoker USA
1733 BENBOW CT STE 3 ORLANDO, FL 32703 US
Phone: 4079245546 Website: http://FindYourStove.com/